A range of solid rubber wall buffers designed to be easily and securely fixed to walls. The buffer can wrap around steel or concrete bollards, absorbing impact and helping stop damage to property. The buffer is supplied in a large range of thicknesses and widths.
 |
 |
|
Drilling through the polished stainless
steel strip in the centre of the buffer. |
The BS range comes in various sizes |
|
Smart stainless steel strip runs through the middle of the wall buffer for extra strength. The strip is pre-punched at 75mm centres giving a choice of fixing locations. The screw head is concealed, stopping any accidental damage to property or vehicles. This range of buffers can be fixed horizontally along walls. A wrap-around corner moulding is available for external corners. Internal corners can be created with a simple mitre cut. The wall buffers can be fitted to many surfaces; brick, plaster, steel and concrete.
BS101 22mm x 14mm thick 33 metre coil
BS102 30mm x 15mm thick 33 metre coil
BS103 44mm x 18mm thick 33 metre coil
BS104 50mm x 25mm thick 18 metre coil
BS105 60mm x 30mm thick 12 metre coil
BS105/C Wrap around corner moulding
BS105/E End stop moulding
Large ‘D’ section rubber wall buffers will reduce the risk of accidents and help protect exposed flat or curved surfaces. Designed to absorb impact damage in loading bays, service areas and car parks. The solid rubber buffer is pre-drilled for concealed fixings at 500mm centres to accommodate the anchor bolts and reduce the risk of accidental
damage. A cut to size service is free of charge. We supply the ‘D’ buffer cut to the exact length to suit your site. The product is widely used for loading bays and is also fitted to the rear of vehicles.
Questions and Answers
Is BS105 Wall Buffer straightforward to fit?
Yes the stainless steel strip it is prepunched at 75mm approx. centres,
you can choose how many holes that you want to drill and fix through. |
|
|
|
