Cone Covers - Safety messages on cones. Printed cone covers with a wide choice of warnings and safety messages. The cover slips over the cone making a range of free-standing signs easy to transport, store and use.

LM1 Lane Markers are red cylinders with a white reflective sleeve for visibility day and night. They lock into both solid rubber ground sockets and Traffic Logs and have a secure and concealed fixing.

SWB/1 Swingback Bollards have a powerful spring mechanism to return and keep the cylinder in the upright position.

Swingback Bollards take low speed impact and recover back to upright positon.	ConeStopper cone base that keeps cones firmly in place with Quickcone inset.

CS/1 ConeStopper rubber base keeps traffic cones firmly in place. A 750mm high traffic cone top locks into position at any point along the rubber ConeStopper base. The solid unbroken line of cones creates a “wall of cones” that is very stable and cannot move out of line.
No creeping towards traffic or moving in high gusting winds.

QuickCones are a flat pack design of cones that are sturdy when snapped into the up position. They can then be collapsed down for easy storage and are ideal to have in the boot of a car. Warning messages can be applied.

STUD/1 Stainless Steel Road Stud, made from austentic stainless steel (18% Chrome, 8% Nickel) specially heat treated for toughness, strength and rust resistance. Fishtail or chisel shank to avoid twisting after application. To assist skid resistance a serrated face is available.

STUD/2 Aluminium Road Stud a short term alternative to stainless steel conforming to B.S. 1490:1998.

Installation: Drill a 32mm diameter hole 80mm deep and fill with hot bitumen. Insert Road Stud and wipe off excess bitumen. Leave to set.