In This Issue
Smart Cable Ramp
BS105 Nitrile Rubber Multi-Purpose Buffer
Bright Reflective DfT Traffic Signage for your site
Out and about . . .
Quick Links

 

QL1cable

QL2buffer

QL3SpeedLimit15 


Smart Cable Ramp

Using Smart Cable Ramps is a very proven way to protect cables and small hoses safely from both vehicles and pedestrian traffic. They have a sturdy fold down cable lid for extra safety and to help create drivers' awareness. Moulded black and yellow, the correct hazard warning colours, the product is designed for a very long service life.

The Smart Cable Ramp sections simply interlock together to form a continuous cable ramp for temporary installations and each section of the ramp has 6 fixing holes for permanent locations. There are two versions of the Smart Cable Ramp available with 5 slots and 3 (wider) slots, both have solid rubber end caps to cope with different schemes and layouts. 

cablewithcolouredhoses

Read More



BS105 Nitrile Rubber Multi-Purpose Buffer

How do you get a rubber wall buffer to go round a bend? Simple, our BS105 solid nitrile rubber wall buffer is 60mm wide x 30mm deep with a stainless steel insert running through the centre. The fixings in the stainless steel are pre-punched at 75mm approx. centres for a secure fixings to walls, doors, steel structures and fabrications. 

For a smart professional finish the buffer range is supplied with 'D' stop ends and moulded rubber external corners for extra safety. The nitrile rubber buffer is extruded in 12 metre coils.

bufferincarpark

Read More



Bright Reflective DfT Traffic Signage for your site

Our reflective traffic signage will help get drivers' attention on your site day or night and even in poor weather conditions 24/7. We manufacture all our signage products to the current highway specification and Department of Transport designs and approved layouts.

We carry the largest range of reflective road signs for 'off the highway' use in the UK and we are digital printers so producing specials and customised signage is not a problem. We supply a range of posts and sign clips to mount the signage at the correct height.

 

stopreflectivesignage

Read More



Out and about . . .

I still think that it is a good idea when I am 'out and about' to take a quick photo (using my BlackBerry that I carry everywhere) if I see a good example of our work in use. In 1980 we were asked to manufacture in steel and aluminium the main entrance sign at Hampton Farm Industrial Estate in Felton, close to Heathrow Airport Middlesex.

20 metres long and 7 tonnes the design and installation was a challenge. We always try to deliver long life products. Having seen the sign again last month for the first time (other than from a landing plane) in almost 30 years I am confident that our work will last another 30 years.

hamptonfarmindustrialestateblackandwhite

Created with Newsweaver